Welcome to my website
My name is Ahmed Al Makky, currently I am honored to hold the teaching position of Assistant Professor at Sharjah University (UOS) (To view my CV). This is at the department of Sustainable and Renewable Energy Engineering (SREE). The modules that I teach and taught at UOS are in the area of Fuel Cells, Wind Energy theory and lab, Energy Storage lab, Hydraulics and Engineering Management. I obtained my doctorate degree (PhD) in the year 2016. Specialized in the area of Computational Fluid Dynamics (CFD), modelling carbon dioxide exchange between the surface of the earth and the atmosphere from the University of the West of Scotland. Beginning of the year 2008 I was awarded a Master's degree (MSc) in the area of Sustainable Energy and Environment from Cardiff University. The masters program got me involved extensively with combustion flame characterization and methods of fuel atomization. My bachelor's degree (BSc) is in Mechanical Engineering specialized in General Engineering (Thermal) from Damascus University 2005.
You can also find me on Research Gate so you can also add me there: ResearchGate
A new CFD group was setup on Facebook to allow some more interaction between different CFD researchers. Click on the the shown Icon to access the web page.
|
Academic Year 2023-2024 Photo Album at University of Sharjah
Truly happy memories always live on, shining. Over time, one by one at the university of Sharjah for this academic year of 2023-2024.
Invention Patent Year 2024
The patent represents an integrated thermal management system with a symmetrical supercapacitor cell, you can download the full document file.
Graduation Project Fall/Spring for the Year 2023/2024
As part of the graduation project at the University of Sharjah during the Fall term of 2023. I had the opportunity and the privilege to supervise three highly talented renewable engineering students on a graduation project titled: Engineering Design of a 1200 [W] Hydrogen Production Unit with a Production Capacity of 0.253 [mL/min]. This is a reverse engineering project that relied on an available design on YouTube.
Graduation Project Fall/Spring for the Year 2023/2024
As part of the graduation project at the University of Sharjah during the Fall/Spring term of 2023/2024. I had the opportunity and the privilege to supervise three highly talented renewable engineering students on a graduation project titled: Alkaline HHO Electrolyser Design. This project was a reverse engineering project based on the following design available on Youtube.
These future engineers are the following:
Eng. Mariam Mohamed Hashim
Eng. Hoor Ali Abdalla
Eng. Aisha Ali Mohamed
Eng. Mariam Mohamed Hashim
Eng. Hoor Ali Abdalla
Eng. Aisha Ali Mohamed
Project details provided in picture album.
Summer Training Project for the Year 2023/2024
As part of the summer training project at the University of Sharjah during the summer term of 2023. I had the opportunity and the privilege to supervise 4 highly talented renewable engineering students on the summer project titled:
Engineering Design of the 11.8 [kW] Avadi MA-250 Engine. More detail about the engine Avadi MA-250 Engine is available online.
Engineering Design of the 11.8 [kW] Avadi MA-250 Engine. More detail about the engine Avadi MA-250 Engine is available online.
These future engineers are the following:
Eng. Khawla Jasim Alblooshi
Eng. Khawla Jasim Alblooshi
Graduation Project Fall/Spring for the Year 2022/2023
As part of the graduation project at the University of Sharjah during the Spring and Fall term of 2023. I had the opportunity and the privilege to supervise three highly talented renewable engineering students on a graduation project titled: Reverse Engineering Design for the NORDEX N90 Wind Turbine with a 2.3 [MW] Output.
The work below is related the first part of the project relating to the focus on the gearbox element of the wind turbine. As part of the graduation project at the University of Sharjah during the Fall term of 2022.
Graduation Project Spring/Fall 2022
As part of the graduation project at the University of Sharjah during the Spring/Fall term of 2022. I had the opportunity and the privilege to supervise four highly talented renewable engineering students on a graduation project titled: A Reverse Engineering Project to Study a Magnetic Bearing Flywheel with an AC Generator/ Motor Unit. The main design was put together by Dr Mark Flynn at the university of Texas at Austin.
These future engineers are the following:
Eng. Alia Al. AlJassmi
Eng. Alya O. AlHosani
Eng. Mahra M. AlAmeeri
Eng. Meerra M. AlHammadi
Eng. Alia Al. AlJassmi
Eng. Alya O. AlHosani
Eng. Mahra M. AlAmeeri
Eng. Meerra M. AlHammadi
Graduation Project Fall/Spring for the Year 2021/2022
As part of the graduation project at the University of Sharjah during the fall/Spring term of 2021/2022. I had the opportunity and the privilege to work with three talented renewable engineering students on a graduation project titled: Design of a Sodium-Ion Battery.
These future engineers are the following:
Eng. Anoud M. B. Albaroud
Eng. Khawla I. A. Albalushi
Eng. Hanan A. A. Mohammad
Eng. Anoud M. B. Albaroud
Eng. Khawla I. A. Albalushi
Eng. Hanan A. A. Mohammad
Graduation Project Fall/Spring for the Year 2021/2022
As part of the graduation project at the University of Sharjah during the fall/Spring term of 2021/2022. I had the opportunity and the privilege to supervise three highly talented renewable engineering students on a graduation project titled: Developing a Bi-Functional Catalyst for Electrically Rechargeable Zinc- Air Batteries.
These future engineers are the following:
Eng. Obaid H. Abdulmalik
Eng. Numaan T. Tahir
Eng. Rashed M. Al Bedwawi
Eng. Obaid H. Abdulmalik
Eng. Numaan T. Tahir
Eng. Rashed M. Al Bedwawi
Teaching Poster for the FuelCell Module Fall 2022
The provided poster below was used as a means of teaching assistance while the fuel cell module was covered at the University of Sharjah. This is a TDM Flex-Stak fuel cell.
Supercapacitor Design Project Poster Fall 2021
The provided poster below was used as means of experimentation while working on the development of a new Zinc-Air and Sodium-Ion batterie at the University of Sharjah. These two electrodes split terminal supercapacitors are available and used in the research field arena.
Graduation Project Spring 2021
As part of the graduation project at the American University of the Middle East (AUM) during the spring term of 2021. I had the opportunity and the privilege to supervise six highly talented mechanical engineering students on a capstone project titled: The Design of a Speed Reduction Gear Box for a 3 [Ton] Overhead Lifting Crane.
These future engineers are the following:
Eng. Anwar Alshuraifat
Eng. Fatma Khalaf
Eng. Ghadeer Bahman
Eng. Rahaf Alenezi
Eng. Suad Ahmad
Eng. Zahraa Sulaiman
Eng. Anwar Alshuraifat
Eng. Fatma Khalaf
Eng. Ghadeer Bahman
Eng. Rahaf Alenezi
Eng. Suad Ahmad
Eng. Zahraa Sulaiman
Working principle video:
Graduation Project Spring 2021
As part of the graduation project at the American University of the Middle East (AUM) during the spring term of 2021. I had the opportunity and the privilege to supervise six highly talented mechanical engineering students on a capstone project titled: The Design of a Speed Reduction Gear Box for a Cement Screw Conveyor.
These future engineers are the following:
Eng. Abdullah Alkandari
Eng. Abdulwahab Albader
Eng. Abdullateef Aldhafeeri
Eng. Ali Boshehri
Eng. Hussain Almusallam
Eng. Redha Hussien
Eng. Abdullah Alkandari
Eng. Abdulwahab Albader
Eng. Abdullateef Aldhafeeri
Eng. Ali Boshehri
Eng. Hussain Almusallam
Eng. Redha Hussien
Graduation Project Fall 2020
As part of the graduation project at the American University of the Middle East (AUM) during the fall term of 2020. I had the opportunity and the privilege to supervise six highly talented mechanical engineering students on a capstone project titled: The Reverse Design of the Main and Rear Wings of an RQ-4C UAV.
These future engineers are the following:
Eng. Reem Almutairi
Eng. Fatemah Alkandari
Eng. Shaikhah Almubarak
Eng. Aliah Aldihani
Eng. Mithah Alzaid
Eng. Danah Alkhaldi
These future engineers are the following:
Eng. Reem Almutairi
Eng. Fatemah Alkandari
Eng. Shaikhah Almubarak
Eng. Aliah Aldihani
Eng. Mithah Alzaid
Eng. Danah Alkhaldi
Graduation Project Spring 2020
As part of the graduation project at the American University of the Middle East (AUM) during the spring term of 2020. I had the opportunity and the privilege to supervise five highly talented mechanical engineering students on a capstone project titled: A Landing Gear Design Study for an RQ-4C Unmanned Aerial Vehicle. The UAV is produced by Northrop Grumman RQ-4C Triton.
These future engineers are the following:
Eng. Amnah Dashti
Eng. Danah AlAzmi
Eng. Fatemah AlZahraa Hussain
Eng. Jumanah Alawadhi
Eng. Wadhha AlOtaibi
Eng. Amnah Dashti
Eng. Danah AlAzmi
Eng. Fatemah AlZahraa Hussain
Eng. Jumanah Alawadhi
Eng. Wadhha AlOtaibi
Graduation Project Spring 2020
As part of the graduation project at the American University of the Middle East (AUM) during the spring term of 2020. I had the opportunity and the privilege to supervise five highly talented mechanical engineering students on a capstone project titled: A Feasibility Study to Design and Simulate and Airless Tire for Use on a Hydrogen Car. The car is referred to as the Robocar.
These future engineers are the following:
Eng. Shahad Hussain
Eng. Shaikhah Al-Khalfan
Eng. Hawraa Ali
Eng. Mariam Aref AlAhmad
Eng. Danah Adel Abdulwahab AlDekheel
Eng. Shahad Hussain
Eng. Shaikhah Al-Khalfan
Eng. Hawraa Ali
Eng. Mariam Aref AlAhmad
Eng. Danah Adel Abdulwahab AlDekheel
Project image video
Graduation Project Fall 2019
As part of the graduation project at the American University of the Middle East (AUM) during the fall term of 2019. I had the opportunity and the privilege to supervise four highly talented mechanical engineering students on a capstone project titled: A Feasibility Study to Select an Unmanned Aerial Vehicle for the Kuwaiti Government for the Role of Coastal Guard Surveillance. The UAV is produced by Northrop Grumman RQ-4C Triton.
These future engineers are the following:
Eng. Jenan Abbas
Eng. Mariam AlHaddad
Eng. Danah AlFadhli
Eng. Elaf AlMousawi
Eng. Jenan Abbas
Eng. Mariam AlHaddad
Eng. Danah AlFadhli
Eng. Elaf AlMousawi
3D printed model
Project picture album.
Project continuation.
Graduation Project Spring 2019
As part of the graduation project at the American University of the Middle East (AUM) during the spring term of 2019. I had the opportunity and the privilege to supervise five highly talented mechanical engineering students on a capstone project titled: AUM Solar Roboracing Car.
These future engineers are the following:
Eng. Ahmad Qallaf
Eng. Ahmad Abbas
Eng. Ali AlAbdullah
Eng. Faisal AlMeqtaa
Eng. Mohammad Jarrad
Eng. Ahmad Qallaf
Eng. Ahmad Abbas
Eng. Ali AlAbdullah
Eng. Faisal AlMeqtaa
Eng. Mohammad Jarrad
Projects I worked On During my PostDoc Spring/Fall 2016
The biodigester design poster.
The electrolyser design poster.
The heat exchanger design poster.
Unless otherwise noted, all content on this site is @Copyright by Ahmed Al Makky 2012-2024 - http://cfd2012.com